Pengaruh Suhu terhadap Kualitas Coating (Pelapisan) Stainless Steel Tipe 304 dengan Kitosan secara Elektroforesis

Trivina Ira Riszki, Harmami Harmami
Submission Date: 2015-02-09 09:52:00
Accepted Date: 2015-03-16 09:16:43

Abstract


Pelapisan kitosan dengan variasi suhu pada Stainless Steel tipe 304 secara elektroforesis telah diteliti. Kualitas hasil pelapisan dengan variasi suhu dikaji dari ketebalan lapisan kitosan dan laju korosinya dalam media NaCl 3%. Ketebalan lapisan kitosan meningkat dan laju korosi menurun dengan meningkatnya suhu proses elektroforesis. Pelapisan kitosan pada suhu 50oC menghasilkan ketebalan lapisan terbaik yaitu sebesar  49,73 ± 6,86 µm dan laju korosi terendah sebesar 0,00065 mpy

Keywords


Coating; Elektroforesis; Kitosan; Stainless Steel tipe 304

References


Fouda, A.S. dan Ellithy, A.S. 2009. “Inhibition Effect of 4 Phenyltiazole derivatives on corrosion of 304L Stainless Steel in HCl Solution”. Corrosion Science 85, 868-875.

AK Steel. 2007. 304/304 L Stainless Steel. www.aksteel.com. Diunduh 23 Desember 2014.

Fellows, P. dan Axtell, B. 2002. Appropriate Food Packaging; Material and Methods for Small Business. Essex U.K: ITDG Publishing.

Nurfiyanda, F., Harmami dan Wahyudi, A. 2010. “Inhibisi Korosi Baja SS 304 dalam Media H2SO4 dengan Isatin”. Prosiding skripsi semester genap 2010/2011. Surabaya: Institut Teknologi Sepuluh Nopember.

Lundvall, O., Gulppi, M., Paez, M.A., Gonzales, E., Zagal, J.H., Paves, J. dan Thompson, G.E. 2007. “Copper Modified Chitosan for Protection af AA-2024”. Surface and Coating Technology, 5973-5978.

Gebhardt, F., Seuss, S., Turhan, M.C., Hornberger, H., Virtanen, S. dan Boccaccini, A.R. 2012. “Characterization of Electrophoretic Chitosan Coatings on Stainless Steel”. Materials Letters, 302-304..

Chang, S.–H. dan Huang, J.-J. 2012. “Biodegradability and Anticoagulant Properties of Chitosan ang sulfonated chitosan films coated on TiNi alloys”. Surface and Coatings Technology, 4959-4963.

Jonathan, J., Tassel, V. dan Rndall C.A. 2006. “Mechanisms of Electrophoretic Deposition”. Key Enginering Materials, 167-174.

Rogacs, A. dan Santiago, J.G. 2013. “Temperature Effect on Electrophoresis”. Analytical Chemistry 85, 5103-5113.

Meepho, M., Wattanasiriwech, D., Wattanasiriwech, S. dan Angwattana, P. 2011. “Effect of Heating Suspension on Fabrication of YSZ Thin Film Using Electrophoretic Deposition Process”. TIChE International Conference 2011. Thailand.

Lazic, M.S., Simovic, K., Miskovic-Stankovic, V.B.dan Kicevic, D. 2004. “The Influence of the Deposition Parameter on the Porosity of Thin Alumina Films on Steel”. Jurnal Serbian Chemistry Society 69, 3, 239-249.

Zhitomirsky, I. dan Hashambhoy, A. 2007. “Chitosan-mediated Electrosynthesis of Organic-Inorganic Nanocomposites”. Journal of Materials Processing Technology 191, 68-72.


Full Text: PDF

CC Licencing


Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Refbacks

  • There are currently no refbacks.


Lembaga Penjaminan Mutu, Pengelolaan dan Perlindungan Kekayaan Intelektual (LPMP2KI) ITS
Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.