Risk Mapping of Bogie S2HD-9C Production Process that Take Effect on Production Fulfillment at PT. Barata Indonesia (Persero)

Faza Yoshio Susanto, Naning Aranti Wessiani
Submission Date: 2016-07-19 15:55:54
Accepted Date: 2017-01-26 11:12:57

Abstract


PT Barata Indonesia (Persero) is one of leading metal works company in Indonesia. It has 3 main business line which are engineering procurement and construction (EPC), industrial tools manufacturing, and foundry. As the company’s strategic objective in delivering quality product and service to the customer, PT Barata Indonesia should maintain their production process properly. One of the featured product of PT Barata Indonesia is bogie. The production process of bogie shows a fluctuative delivery fulfillment. It can be proved by the contract amendment information. Risk management can be used as the method to manage risk inside the production process of bogie. Therefore, this research is aimed to identify risks that may occur from each activities of bogie S2HD-9C’s production process. The risk identification is done by using fault tree analysis method in order to determine the root cause of each activity performed. The risk evaluation is done by using FMEA method which can classify the effects of failure based on the severity and occurrence of failure. Then continue to the risk mapping and risk mitigation determination for bogie S2HD-9C’s production process. Loss that caused by the emergence of risk also determined using value at risk method. Moreover, risk profile dashboard will be provided as the tools in managing risk.

Keywords


Fault Tree Analysis (FTA); FMEA; Production Process; Risk Dashboard; Risk Management; Risk Map; Risk Mitigation; Value at Risk

References


American Society of Mechanical Engineers. (1947). Operation and Flow Process Charts. New York: American Society of Mechanical Engineers.

Anityasari, M., & Wessiani, N. A. (2011). Analisa Kelayakan Usaha. Surabaya: Guna Widya.

Carlson, C. S. (2012). Effective FMEAs: Achieving Safe, Reliable, and Economical Products and Processes using Failure Mode and Effects Analysis. John Wiley & Sons.

Choudhry, M. (2001). The Bond and Money Markets: Strategy, Trading, Analysis. Butterworth-Heinemann.

Chrysler Corporation, Ford Motor Company, General Motors Corporation. (1993). Potential Failure Mode and Effects Analysis (FMEA) Reference Manual. Automotive Industry Action Group.

Fabók, Z. (2013, September 9). Fault Tree Analysis. Retrieved from zsoltfabok.com/: http://zsoltfabok.com/blog/2013/09/fault-tree-analysis/

Haifani, A. M. (2008). Manajemen Resiko Bencana Gempa Bumi (Studi Kasus Gempa Bumi Yogyakarta 27 Mei 2006). Seminar Nasional IV SDM Teknologi Nuklir (pp. 285-294). Yogyakarta: Sekolah Tinggi Teknologi Nuklir - BATAN.

Hillson, D., Grimaldi, S., & Rafele, C. (2006). Managing Project Risk Using a Cross Risk Breakdown Matrix. Risk Management, 61-76.

Institute of Risk Management. (2010). A structured approach to Enterprise Risk Management (ERM) and the requirements of ISO 31000. London: Institute of Risk Management.

International Organization for Standardization. (2009). ISO 31000:2009 (en). Retrieved from ISO: https://www.iso.org/obp/ui/#iso:std:iso:31000:ed-1:v1:en

Monahan, G. (2008). Enterprise Risk Management: A Methodology for Achieving Strategic Objectives. Canada: John Wiley & Sons, Inc.

Nugroho, H. R. (2014). Reduksi Waste dan Peningkatan Kualitas pada Proses Produksi Roll Gilingan Tebu dengan Pendekatan Metodologi Lean Six Sigma (Studi Kasus : PT Barata Indonesia, Gresik). Surabaya: Institut Teknologi Sepuluh Nopember.

Pramudita, D. R. (2014). Perancangan dan Pengukuran Kinerja Lingkungan dengan Pendekatan Integrated Environment Performance Measurement System (IEPMS) di PT Barata Indonesia. Surabaya: Institut Teknologi Sepuluh Nopember.

PT. Barata Indonesia. (2013). PT. Barata Indonesia. Retrieved from PT. Barata Indonesia: www.barata.co.id

Sarwoko, S. O. (2015). Designing Fuzzy FMEA Risk Management at Production Department PT. Charoen Pokphand Tbk - Poultry Feed Krian, Sidoarjo. Surabaya: Institut Teknologi Sepuluh Nopember.

Tucson. (2003). FMEA Info Centre. Retrieved from FMEA Info Centre: www.fmeainfocentre.com

Utami, N. R. (2014). Penyusunan Peta Risiko dalam Upaya Pengembangan Risiko pada PT. Telkomsel. Surabaya: Institut Teknologi Sepuluh Nopember.

Wang, W.-C., Lin, C.-H., & Chu, Y.-C. (2011). Types of Competitive Advantage and Analysis. International Journal of Business and Management, 100-104.


Full Text: PDF PDF

CC Licencing


Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Refbacks

  • There are currently no refbacks.


Creative Commons License
Jurnal Teknik ITS by Lembaga Penelitian dan Pengabdian Kepada Masyarakat, LPPM-ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejurnal.its.ac.id/index.php/teknik.