Analisa Arc Flash Pada Sistem Kelistrikan Di PT. Wilmar Nabati Indonesia, Gresik – Jawa Timur

Aditya Aji Nugroho, Margo Pujiantara, Arif Musthofa
Submission Date: 2017-01-26 15:05:20
Accepted Date: 2017-03-17 10:12:42

Abstract


Studi untuk mengetahui besar busur api yang dihasilkan pada masing-masing switchgear perlu dilakukan untuk mengklasifikasikan kategori energi busur api yang terjadi serta kaitannya dengan PPE (Personal Protective Equipment) yang harus dikenakan pekerja sebagai langkah pencegahan agar terhindar dari jatuhnya korban jiwa. Oleh karena itu perlu dilakukan perhitungan insiden energi arc flash sesuai standar IEEE 1584-2002 serta pengklasifikasian kategori dan alat perlindungan diri yang tepat agar memberikan rasa aman dan nyaman bagi para pekerja sehingga dapat bekerja secara optimal. Studi ini akan coba diterapkan pada sistem kelistrikan di PT. Wilmar Nabati Indonesia, Gresik – Jawa Timur mengingat pentingnya perusahaan tersebut mengamankan peralatan serta pekerjanya dari insiden energy arc flash. Hasil yang didapat pada tugas akhir ini adalah pada tipikal 1 nilai insiden energinya mengalami peningkatan yaitu dari 1.988 cal/cm2 menjadi 8.66 cal/cm2, pada tipikal 2 nilai insiden energi tertinggi 19.596 cal/cm2 turun menjadi 6.00 cal/cm2, pada tipikal 3 nilai insiden energi nya mengalami peningkatan yaitu dari 19.596 cal/cm2 menjadi 36.52 cal/cm2 kenaikan ini disebabkan karena terjadi kesalahan koordinasi rele.

Keywords


Acr Flash; PPE (Personal Protective Equipment); Incident Energy; standard IEEE 1584-2002

References


“Impact of Arc Flash Hazards on Medium Voltage Switchgear” K. R. Shah, Life Senior Member, A. Cinsavich, P. De Silva, Member Shah & Associates, Inc. 416 North Frederick Avenue, Gaithersburg, MD 208770197-2618/07/$25.00 © 2007 IEEE.

Balasubramanian, Ilanchezhian. “Impact of Available Fault Current Variation on Arc-Flash Calculation”, IEEE Transactions on Industry Applications, vol 40, No 5, September/October 2010.

J.C. Das, “Design Aspects of Industrial Distribution Systems to Limit Arc Flash Hazard,” IEEE Transactions on Industry Applications, pp 1476, November/December 2005.

Tinsley H.W., Hodeker., Graham A.M., “Arc Flash Hazard Calculations – Myths, Facts, and Solutions,” IEEE Industry Applications Magazine, pp. 58, January/February 2007.

NFPA 70E., “Electrical Safety Requirements for Employee Workplaces 2009 Edition”, NFPA 70E-2009.

IEEE Std. 1584-2002., “IEEE Guide for Performing Arc-Flash Hazard Calculation”, by the Institute of Electrical and Electronics Engineers, Inc., 2002.


Full Text: PDF ()

CC Licencing


Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Refbacks

  • There are currently no refbacks.


Creative Commons License
Jurnal Teknik ITS by Lembaga Penelitian dan Pengabdian Kepada Masyarakat, LPPM-ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at http://ejurnal.its.ac.id/index.php/teknik.
Statistik Pengunjung