Studi Eksperimental Karakteristik Aliran Melintasi Silinder Sirkular Tunggal dengan Penambahan Airfoil NACA0012; NACA0018; NACA0024 di Belakang Silinder Sirkular Utama pada Jarak Longitudinal (S/D) 1.6

Nivana Hafizah, Wawan Aries Widodo
Submission Date: 2023-08-01 10:19:18
Accepted Date: 2023-12-14 07:42:44

Abstract


pengetahuan yang fenomenanya kerap berkaitan dengan kehidupan manusia. Salah satunya fenomena aliran fluida melintasi suatu bluff body. Dalam aplikasi engineering fenomena ini memegang peranan penting seperti pada konstruksi pipa bawah laut, jembatan, dan tube pada heat exchanger. Bluff body dapat menghasilkan wake yang besar, salah satunya adalah silinder. Silinder memilki profil geometri yang bersifat strong adverse pressure yang menghasilkan wake yang besar sehingga berdampak pada dihasilkannya gaya hambat (drag) yang besar pada silinder. Oleh karena itu perlu untuk dilakukan pengurangan gaya hambat pada silinder dengan penambahan bodi pengganggu atau biasa disebut dengan metode passive flow control. Eksperimental ini dilakukan pada sub-sonic wind tunnel berdimensi (H = 200 mm; W = 200 mm; L = 2000 mm), silinder sirkular utama berdiameter (D = 36 mm) dengan penambahan airfoil dengan chord length (c = 36 mm). Variasi simetris airfoil (NACA0012, NACA0018, NACA0024) dengan variasi jarak longitudinal (S/D) 1.6 pada bilangan Reynolds 2.01 x 𝟏𝟎𝟒. Hasil yang diperoleh menunjukkan bahwa dengan penambahan airfoil di belakang silinder sirkular tunggal mampu mereduksi gaya drag yang bekerja pada silinder sirkular utama. Reduksi gaya drag ini diindikasikan oleh penurunan koefisien drag pressure ( 𝑪𝑫𝑷) pada silinder sirkular utama. Pada eksperimen ini, didapatkan reduksi koefisien drag pressure ( 𝑪𝑫𝑷) paling optimal terjadi pada konfigurasi dengan airfoil NACA0024

Keywords


Airfoil; Bluff Body; Drag Force; Pressure Drag; Sub-sonic Wind Tunnel

Full Text: PDF

CC Licencing


Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Refbacks

  • There are currently no refbacks.


Creative Commons License
Jurnal Teknik ITS by Direktorat Riset dan Pengabdian Masyarakat (DRPM) ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://ejurnal.its.ac.id/index.php/teknik.
Statistik Pengunjung