10.000 DWT Coal Vessel/Barge Open Pier Jetty Planning at Molotabu, Gorontalo

Farel Aimar Zain, Fuddoly Fuddoly, Cahya Buana
Submission Date: 2024-02-13 15:49:03
Accepted Date: 2024-05-20 18:27:38


Coal exports and imports are common in Indonesia, especially Gorontalo, North Sulawesi, which is always involved in coal export and import activities. Coal is one of the important energy sources in this country. These activities always involve ships. A ship certainly needs a station like any other form of transportation. Open pier construction has various regulations so that vessel can dock safely. Various things can affect the dimension and even the strength of the port structure. From the planning of the pier, implementation methods are also carried out to calculate the planned cost budget The results of planning an open pier jetty for a 10,000 DWT barge include a minimum depth recommendation of -6.5 mLWS. Recommended jetty dimensions are 108 m long and 20 m wide at an elevation of +2.5 mLWS. From the results of the upper structure calculations, a plate with a thickness of 35 cm was obtained. Then for the beam requirements for the jetty structure (500 x 750 mm) and fender beams (2600 x 2500 x 1200 mm). For single pile cap required (2000 x 2000 x 1000 mm) and batter pile cap (3000 x 2000 x 1000 mm). From the results of the substructure calculations, it was found that D609 mm steel piles with a thickness of 12 mm were needed for the jetty structure. Dredged volume requirement is 20,300 m3. Breast wall dimensions (400 x 2000 mm), cantilever dimensions (150 x 250 mm), foot dimensions (2500 x 400 mm), and stiffener thickness of 30 cm. From the overall calculation results, the implementation method can be planned as follows. Preparatory work, dredging work, retaining wall work, jetty structure work, and fender and bollard installation work. From this work, the total cost required is Rp. 51.324.256.809.k, the total cost required is Rp. 51.324.256.809


Cost Estimating; Dredging; Jetty; Open Pier; Retaining Wall

Full Text: PDF

CC Licencing

Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).


  • There are currently no refbacks.

Creative Commons License
Jurnal Teknik ITS by Direktorat Riset dan Pengabdian Masyarakat (DRPM) ITS is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Based on a work at https://ejurnal.its.ac.id/index.php/teknik.
Statistik Pengunjung