Sintesis Nickel – Yttria Stabilized Zirconia (Ni– YSZ) sebagai Anoda Solid Oxide Fuel Cell (SOFC)

Pulung Subuh Nur Baity, S Suasmoro
Submission Date: 2016-07-22 11:54:37
Accepted Date: 2016-11-23 18:14:55


Cermet Nickel–Yttria Stabilized Zirconia (Ni–YSZ) diperoleh dari proses reduksi pada material Nickel Oxide–Yttria Stabilized Zirconia (NiO–YSZ) yang disintesis menggunakan metode reaksi padat dari campuran serbuk NiO–7YSZ (7%mol Y2O3 dan 93%mol ZrO2)–pore former (white starch) dengan perbandingan komposisi massa 4:6:1. Reduksi NiO–YSZ dalam bentuk pelet, dilakukan dengan temperatur reduksi 1000°C selama 3 jam dalam aliran gas 10%H2 dan 90%Ar untuk menghasilkan material Ni–YSZ. Karakterisasi dilakukan dengan menggunakan Difraktometer Sinar–X (XRD). Berdasarkan hasil penelitian, cermet Ni–YSZ dihasilkan pada temperatur reduksi 1000°C selama 3 jam dengan kuantitas komposisi fasa YSZ kubik 46,98%, YSZ monoklinik 18,39 %, Ni kubik 31,22% dan NiO kubik 3,40%.


anoda; porositas; reduksi.


Boudghene Stambouli, A., Traversa, E., 2002. Fuel cells, an alternative to standard sources of energy. Renew. Sustain. Energy Rev. 6, 295–304. doi:10.1016/S1364-0321(01)00015-6., n.d. IEA: SITES 2006 [WWW Document]. URL (accessed 6.16.16).

Raharjo, Jarot. 2008. Perkembangan Teknologi Material pada Sel Bahan Bakar Padat Suhu Operasi Menengah. Institute Fuel Cell, University Kebangsaan Malaysia : Malaysia.

Horri, B.A., Selomulya, C., Wang, H., 2012. Electrochemical characteristics and performance of anode-supported SOFCs fabricated using carbon microspheres as a pore-former. Int. J. Hydrog. Energy, 2011 International Workshop on Molten Carbonates & Related Topics 37, 19045–19054. doi:10.1016/j.ijhydene.2012.10.005.

Halinen, M., others, 2015. Improving the performance of solid oxide fuel cell systems.

Sulistyo. 2015. Pengontrolan Kualitas Anode Solid Oxide Fuel Cell (SOFC) melalui Pengontrolan Porositas. Jurusan Teknik Mesin Fakultas Teknik Universitas Diponegoro : Indonesia.

Zuo, C., Liu, M., Liu, M., 2012. Solid oxide fuel cells, in: Sol-Gel Processing for Conventional and Alternative Energy. Springer, pp. 7–36.

Fergus, J., Hui, R., Li, X., Wilkinson, D.P., Zhang, J., 2008. Solid oxide fuel cells: materials properties and performance. CRC press.

Talebi, T., Sarrafi, M.H., Haji, M., Raissi, B., Maghsoudipour, A., 2010. Investigation on microstructures of NiO–YSZ composite and Ni–YSZ cermet for SOFCs. Int. J. Hydrog. Energy, The 1st Iranian Conference On Hydrogen & Fuel Cell 35, 9440–9447. doi:10.1016/j.ijhydene.2010.04.156.

Yoo, J.-Y., Cho, C.-K., Shon, I.-J., Lee, K.-T., 2011. Preparation of porous Ni–YSZ cermet anodes for solid oxide fuel cells by high frequency induction heated sintering. Mater. Lett. 65, 2066–2069. doi:10.1016/j.matlet.2011.04.032.

Full Text: PDF

CC Licencing

Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).


  • There are currently no refbacks.

Lembaga Penjaminan Mutu, Pengelolaan dan Perlindungan Kekayaan Intelektual (LPMP2KI) ITS
Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.